GE Masoneilan 469 Series, Instruction Manual

Page: 168 / 348

5–24 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS
FIGURE 5–3: Reduced Voltage Starter Inputs
5.3.6 Preset Motor Values
PATH: SETTINGS

S2 SYSTEM SETUP

PRESET MOTOR VALUES
The 469 can preset the following actual value accumulators. When an accumulator is
preset, 469 discards the previous value and continues to accumulate starting from the
new value.
• Motor running hours
Display and set actual value shown in
ACTUAL VALUES > A4 MAINTENANCE > TIMERS > MOTOR RUNNING HOURS
• Positive watt hours
Display and set actual value shown in
ACTUAL VALUES > A2 METERING DATA > POWER METERING > POSITIVE WATTHOURS
808723A1.CDR
FULL VOLTAGE
AUXILIARY ‘a’
REDUCED VOLTAGE
AUXILIARY ‘a’
STARTER STATUS
SWITCH INPUT
(Setpoint = ‘Starter Auxiliary A’)
D16
D23
REDUCED VOLTAGE STARTER AUXILIARY ‘A’ STATUS INPUT
REDUCED VOLTAGE STARTER AUXILIARY ‘B’ STATUS INPUT
REDUCED VOLTAGE
AUXILIARY ‘b’
FULL VOLTAGE
AUXILIARY ‘b’
D16
D23
STARTER STATUS
SWITCH INPUT
(Setpoint = ‘Starter Auxiliary B’)

PRESET [

]
MOTOR VALUES
MOTOR RUNNING HOURS
PRESET: 0
Range: 0 to 99999 in steps of 1
MESSAGE
POS WATTHOURS PRESET:
0.000 MWh
Range: 0 to 999999.999 in steps of
.001
MESSAGE
POS varHOURS PRESET:
0.000 Mvarh
Range: 0 to 999999.999 in steps of
.001
MESSAGE
NEG varHOURS PRESET:
0.000 Mvarh
Range: 0 to 999999.999 in steps of
.001