manualshive.com logo in svg

GE MAC 5500, Service Manual

The GE MAC 5500 Service Manual is a comprehensive user manual available for free download. Unlock the full potential of your MAC 5500 device with this essential manual, providing in-depth guidance and troubleshooting solutions. Access it conveniently from manualshive.com to maximize your device's performance and enhance patient care.

Share
Download
background image

6-4

MAC

 5500 resting ECG analysis system

Revision E

2020299-020

Parts List: Field Replaceable Units

Field Replaceable Units

The following items may not be assigned separate manufacturing part numbers 
because they are normally part of a larger assembly. Since they are considered field 
replaceable units (FRUs), they have specific service part numbers so they can be 
ordered and replaced by service technicians. Contact Tech Support for FRU 
information for assemblies used on previous configurations.

NOTE

Verify part numbers before ordering service parts (field replaceable units). 
See the tech memo series for this product for changes or additions to this list.

For Technical Support parts reference, see pn 2026609-001, 
MAC 5500 Assembly.

Field Replaceable Units 

Item

Part Number

Battery Assembly

900770-001

Power Supply Assembly

421117-001

Keyboard Assembly

421115-XXX

Display Assembly

2019106-001

Top Cover (See NOTE) 
Label Top Cover (See NOTE) 
 
     NOTE: Top Cover & Label must be ordered together.

2017413-001
2008167-001

Printhead

422397-001

Writer Assembly

421108-006

Roller Assembly

422396-006

Writer Release Button

2005920-001

Leaf Spring

417565-001

Gas Cylinder

416015-001

Battery/LED Circuit Board

801222-001

MAC 5000 Country Modem PTO Option Class

MAC5000_MODEM

Country Specific (external modem)

2005264-0XX

MAC 5000 CAM14 PTO Option Class

MAC5000_CAM14

Kit CAM14 Resting ECG W/AHA Adapter

901142-001

Kit CAM14 Resting ECG W/IEC Adapter

901142-002

MAC5000 Keyboard PTO Option Class

MAC5000_KEYBRDS

Keyboard Assembly (Resting), English

421115-101

Keyboard Assembly (Stress), English

421115-201

Summary of Contents for MAC 5500





















































































































































































Reviews:

No comments

Related manuals for MAC 5500

Rangevision PRO Setup And Calibration Instructions preview
PRO
Brand: Rangevision Pages: 31
NANLUX TK-200 Manual preview
TK-200
Brand: NANLUX Pages: 39
Federal Signal Corporation AD Series Wiring And Maintenance Instructions preview
AD Series
Brand: Federal Signal Corporation Pages: 4
ParaBody GS2 User Manual preview
GS2
Brand: ParaBody Pages: 7
Raymarine ST70 Instrument Quick Reference Manual preview
ST70 Instrument
Brand: Raymarine Pages: 12
Raven SmarTrax Operation Manual preview
SmarTrax
Brand: Raven Pages: 73
Tascam DA-40 Tehnical Documentation preview
DA-40
Brand: Tascam Pages: 3
RAB Lighting SR2 Installation Instructions preview
SR2
Brand: RAB Lighting Pages: 4
campgo Raiju User Manual preview
Raiju
Brand: campgo Pages: 33
Ultimate Healthcare Tamora Plus II Quick Reference Manual preview
Tamora Plus II
Brand: Ultimate Healthcare Pages: 2
Ultimate Healthcare Cura II User Manual preview
Cura II
Brand: Ultimate Healthcare Pages: 40
mychway MS-7206F User Manual preview
MS-7206F
Brand: mychway Pages: 56
GE 60105LO Instructions preview
60105LO
Brand: GE Pages: 2
Opvimus IF-702ETH Operating Instructions Manual preview
IF-702ETH
Brand: Opvimus Pages: 50
FHF Avisa Line XL04 Quick Start Manual preview
Avisa Line XL04
Brand: FHF Pages: 2
Joerns Healthcare Oxford Ascend User Instruction Manual preview
Oxford Ascend
Brand: Joerns Healthcare Pages: 106
Lencarta SmartFlash 4 Instruction Manual preview
SmartFlash 4
Brand: Lencarta Pages: 6
laerdal SimNewB Anomaly Set Setup Manual preview
SimNewB Anomaly Set
Brand: laerdal Pages: 10

Brands by name

Popular brands

Load more brands