GE MAC 5000, Operator'S Manual

Page: 146 / 228

MAC 5000 System — 2000657-024, Revision A
Defining the System Setup: Define the ECG Setup
12-22
Disable lead off
check Select No to display a screen message
when the system detects a disconnected
leadwire.
Baseline wander
warning Select Yes to display a screen message
when the system detects a wandering
baseline.
Muscle tremor
warning
Select
Yes to display a screen message
when the system detects muscle tremor.
AC filter Use this filter to remove AC line artifact.
AC noise level
warning Select Yes to program the system to check
for alternating current interference when
recording an ECG.
Screening criteria Select Yes to prevent specific 12SL
analysis statements from appearing on
ECG reports.
See “Editing Acronyms” on page C-1 to
identify these statements.
Figure 12-10. ECG Acquisition/Analysis (Continued)
Item Description
Suppress
NORMAL
statement Select Yes to prevent the “Normal ECG”
12SL analysis statement from appearing
on printed, stored, and transmitted ECG
reports.
Suppress
ABNORMAL and
BORDERLINE
statements Select Yes to prevent the “Abnormal ECG”
and “ Borderline ECG” 12SL analysis
statements from appearing on printed,
stored, and transmitted ECG reports.
Pacemaker pulse
enhancer Select Yes to detect very small pacemaker
pulses. However, when Pacemaker pulse
enhancer is on, the system should NOT be
close to equipment emitting high frequency
radiation. High frequency radiation can
interfere with pacemaker pulse detection.
Preview before
analysis Select Yes to allow the user to always
preview a recorded ECG before the system
analyzes the data.
Figure 12-10. ECG Acquisition/Analysis (Continued)
Item Description