GE M-Pact Plus, Operating & Installation Instructions Manual

Page: 48 / 135

48
ETU
5.2 Menu S 5.2 Menu S 5.2 Menu S 5.2 Menu S 5.2 Menu Str tr tr tr tructur uctur uctur uctur ucture e e e e
There are four levels within the M-PRO menu structure, the main three are described below. Only those menus specified at the time of ordering will be factory set into
M-PRO hence not all of the following menus will be available.
1 1 1 1 1
Options for M-PR Options for M-PR Options for M-PR Options for M-PR Options for M-PR O 30 O 30 O 30 O 30 O 30
2 2 2 2 2
Options for M-PR Options for M-PR Options for M-PR Options for M-PR Options for M-PRO 40 O 40 O 40 O 40 O 40
OPER
AT
O
R
C
ONTRO
L
Leve l 1 Menu Le vel 2 Me nu Level 3 Menu Level 4 Menu
I set e.g: 40% In
Curve Type e.g: Standard Inverse
Curve Speed e.g: Curve 6
Cooling Time e.g: Instantaneous
Inverse Short Circuit Current e.g: 4 x Iset
Fixed Short Circuit Current e.g: 6 x Iset
Fixed Short Delay e.g: 300ms
Neutral Rating e.g: Fully Rated
Phase Rotation e.g: RYB Clockwise
REF Current e.g: 10% In
REF Alarm e.g: ON
UEF Current e.g: 30% In
UEF Trip Time e.g: 400ms
UEF Cropping e.g: 2.5
SEF Current e.g: 50% In
SEF Trip Time e.g: 500ms
SEF Cropping e.g: 4
SEF Intertrip e.g: ON
Load Monitoring e.g: Load shedding/pre trip alarm
Start Shedding e.g: 95% x Iset
Stop She dding e.g: 80% x Iset
Red Ylw Blue (A)
Red Ylw Blue (% I set)
Neutral (% I set)
Highest Phase (A)
Peak RMS Phase (A)
SE F Current (A)
REF Current (A)
U EF Current (A)
Thermal Register (%)
Input 1
e.g: warn
Input 2 e.g: warn
Input 3 e.g: warn
Input 4 e.g: warn
Existing Faults e.g: No Faults
History of Trips e.g: Ove rload Trip on Red
Breaker position
e.g: Close d
Contact Life e.g: 10%
Total Life e.g: 70%
No. of Operations e.g: 3020
M-PRO Status Powered U p Time e.g: 500 minutes
Software Issue e.g: 5201D06, 6A4AH
EPROM Name e.g: M-PRO 5201 D 6
PAMM Status PAMM Identity e.g: 40/F/A9A4701H
Baud Rate e.g: 9600
Link Scan Range e.g: 0.01 to 0.03
Link Scan Time e.g: 44 seconds
Link Timeouts e.g: 2
CRC E rrors e.g: 0
Link Address e.g: 3
Baud Rate Setup e.g: automatic
Link Fail Action e.g: warn
Fault Crnt Type e.g: Ove r Current
Ove r Crnt Level e.g: 2 x Iset
Earth Crnt Level e.g: 20%
Activate Test e.g: Start Test
Communications
2
Link Status
Link Setup
Test Mode (available when test box is
inserted and switched on)
Faults
Syste m Status Breaker Status
Software Status
Ammeters
Input Settings
1, 2
Protection Curve Settings
Earth Protection
1,2
Load Monitoring
1,2