GE LOGIQ e, Basic Service Manual

Page: 198 / 427

Components and Functions (Theory)
5-4 LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
General Information
LOGIQ e is an ultrasound imaging scanner.
The system can be used for:
• 2D Black and White imaging
• 2D Color Flow
• M-Mode Black and White imaging
• Doppler
•
A number of combinations of the above
LOGIQ e is a digital beam forming system that can handle up to
128 elements linear probes.
Signal flow from the Probe Connector Panel to the Front End, to
the Mid Processors and Back End Processor and finally to the
LCD and peripherals.
System configuration is stored on a hard disk drive and all
necessary software is loaded from the hard disk drive on power
up.
Top Console
The Top Console includes a Standby/On switch, a keyboard,
different controls for manipulating the picture quality, controls for
use in Measure & Analyze (M&A), and loudspeakers for stereo
sound output (used during Doppler scanning).