GE KISS, Service Manual

Page: 37 / 54

4
Maintenance, Cleaning and
Troubleshooting (KISS™/KISS™
Multilead)
Maintenance
The application system and negative pressure pump do not require any maintenance.
Cleaning and Disinfecting the Instrument
Surfaces
WARNING:
SHOCK HAZARD - Disconnect the instrument from the ECG recorder or the mains
plug of the power supply unit before cleaning and disinfecting the instrument
surface and/or maintenance!
Use a moist cloth to wipe the pole and the CAM-USB A/T KISS™ interface clean. Do
not allow liquid to enter the equipment. When the surface is very soiled, use a mild
soap solution or detergent. Never use abrasive cleaners.
All disinfectants containing alcohol can be used. Following are some products
found in the list of disinfectants issued by DGHM (German Society for Hygiene and
Microbiology): Funktiosept A, Mucocit-B or Meliseptol.
Cleaning and Disinfecting the Patient and
Leadwires
Disconnect the cables from the system before cleaning and disinfecting them.
When disconnecting the plug-in connectors always pull on the plug and not the cables.
22745010H
KISS™ / KISS™ Multilead
37