MA-005 - Minitrans Installation Manual - Rev 4.5
13-Aug-20
Page 60 of 86
L.5.4
Suspend the product on the support bracket and attach the bottom
isolators
The following tools and fittings as listed in Table L-4 and as shown in Figure L-12 are
required in order to suspend the product to the support bracket and attach the bottom
isolators.
Table L-4: Bottom isolators tools and fittings
Item No.
Description
Qty
10 mm nut spinner
5 mm Allen key
10 mm spanner
KAN03010
M6 flat washers
6
KAN02009
M6 nuts
6
KAN03012
M6 spring washers
6
KAN05026
Large flat washers
6
MECH09025
Isolators
2
MECH00249
O rings (7.1 x 1.6)
2
Figure L-12: Bottom isolators tools and fittings
Lift the product and place it over the top four isolators (MECH09025) by positioning the
four holes over the four isolator threads as shown in Figure L-13.
Note: The left and right brackets each weigh 2 Kg (4.5 lb) giving the product a
combined total weight of 34.5 Kg (76 lb), so it is important to take
precautions prior to lifting. As such, the product shall be lifted into
position using sufficient personnel or mechanical means in accordance
with local regulations and company policies.
Figure L-13: The product positioned over the isolators
