MA-005 - Minitrans Installation Manual - Rev 4.5
13-Aug-20
Page 70 of 86
▪
Reconnect the fan cable shown in Figure M-14
to the ‘Z3 fan’ connector on the
marshalling board.
Figure M-14: Reconnect the fan cable
▪
Reconnect the USB cable shown in Figure M-15 to the rear of the USB port connector.
Figure M-15: Reconnect the USB cable
▪
Reconnect the display cable to the display board as shown in Figure M-16.
Figure M-16: Reconnect the display cable
Reconnect this cable to the
USB port
Reconnect this cable
to the display board
Reconnect the fan
cable at point Z3