Your Air Conditioner
air out
air in
MASTER CONTROL
Master Control
OFF
turns air conditioner off.
FAN
permits low fan speed
operation without cooling.
FAN
permits
high fan speed
operation without cooling.
Saver Switch must be in the “norm”
position.
LOW COOL
permits cooling with
low fan speed operation.
THERMOSTAT
Thermostat Control
When you turn the Thermostat
Control to the desired setting, the
thermostat will
control
the temperature of the indoor air.
The higher the number selected,
the cooler the indoor air will be.
The Save Energy
is a visual
reminder that you can conserve
energy by selecting a higher room
temperature but still keep the room
cool and less humid than outside.
VENT
Ventilation Control
When the Vent Control is at the
“closed” position, the vent door is
closed and only the air inside the
room can be circulated and
conditioned.
Set the control at the “air in”
position and the vent door opens to
allow a small amount of outdoor air
to enter the room.
Set the control at the
position and the vent door opens to
HIGH COOL
permits cooling with
allow air, smoke or odors to-be
high fan speed operation.
exhausted from the room.
(on models so equipped)
The Power Saver
Switch controls the
fan operation.
When it’s in the
“norm” position,
the fan will
circulate room air
continuously. When
it’s in the “save”
position, the fan
will automatically
cycle on and off
with the compressor.
POWER
SAVER
For fan only operation, Power
Saver
must be in the “norm”
position.
4
