GE JVX5300 Owner'S Manual & Installation Instructions Download Page 4

4

49-80783-3

SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING 

How to Remove Protective Shipping Film and Packaging Tape

Carefully grasp a corner of the protective shipping film 
with your fingers and slowly peel it from the appliance 
surface. Do not use any sharp items to remove the film. 
Remove all of the film before using the appliance for the 
first time.

To assure no damage is done to the finish of the 
product, the safest way to remove the adhesive from 
packaging tape on new appliances is an application of 
a household liquid dishwashing detergent. Apply with a 
soft cloth and allow to soak.

NOTE: 

The adhesive must be removed from all parts.

READ AND SAVE THESE INSTRUCTIONS

REMOTE ENABLE EQUIPMENT (on some models)

This device complies with part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and 
(2) this device must accept any interference received, 
including interference that may cause undesired 
operation.

The wireless communication equipment installed on 
this hood has been tested and found to comply with 
the limits for a Class B digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to:

(a) 

provide reasonable protection against harmful 

interference in a residential installation. This 
equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there 
is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

Ŷ5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD
Ŷ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQG

receiver.

Ŷ&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLW

different from that to which the receiver is 
connected.

Ŷ&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79

technician for help.

(b) 

accept any interference received, including 

interference that may cause undesired operation of the 
device.

Note 

that any changes or modifications to the wireless 

communication device installed on this oven that are 
not expressly approved by the manufacturer could void 
the user’s authority to operate the equipment.

Summary of Contents for JVX5300

























Reviews: