– 19 –
Surface Lamps
Removal
Remove the screw on the surface lens panel and
open the panel.
Surface Lamp Assemblies
Resistance through the surface lamps from the
CN04 pin 3 to the power cord (N) is approximately
62 ohms.
Removal
Remove 5 screws from the bottom of the
microwave oven cabinet and remove the bottom
plate.
Remove the screw from each lamp socket and
remove the lamp assembly from the oven.
Disconnect the electrical connector.
Pull the light out of the socket.
Note: When installing a new halogen bulb, be
sure to handle the bulb with a clean, dry cloth.
Replace the halogen lamp with a 120VAC, 20W
GE halogen lamp bulb (WB36X10213).
