Pre-Test Checklist
Remove all protective film,
if present, and any stickers.
Check to be sure that all wiring
is secure and not pinched or in
contact with moving parts.
Check level of appliance.
Check that the cooktop is properly
grounded.
8
Installation Instructions
Operation Checklist
Remove all items from the top
of the cooktop surface.
Turn on the power to the cooktop.
(Refer to your Owner’s Manual.)
Verify that all surface burners
operate properly.
Check that the circuit breaker is
not tripped nor the house fuse
blown.
Check that conduit is securely
connected to the junction box.
See Owner’s Manual for
troubleshooting list.
NOTE TO ELECTRICIAN:
The power leads supplied
with this appliance are UL
recognized for connections to
larger gauge household wiring.
The insulation of these leads is
rated at temperatures much
higher than the temperature
rating of household wiring. The
current carrying capacity of a
conductor is governed by the
wire gauge and also the
temperature rating of the
insulation around the wire.
NOTE: ALUMINUM WIRING
A. WARNING:
IMPROPER CONNECTION OF
ALUMINUM HOUSE WIRING TO THE
COPPER LEADS CAN RESULT IN A
SERIOUS PROBLEM.
B. Splice copper wires to aluminum
wiring using special connectors
designed and UL approved for joining
copper to aluminum and follow the
manufacturer’s recommended
connector procedure closely.
NOTE: Wire used, location and enclosure
of splices, etc., must conform to good
wiring practice and local codes.