manualshive.com logo in svg

GE JKP70BMBB, Installation Instructions Manual

Share
Download
GE JKP70BMBB Installation Instructions Manual Download Page 3

3

Open oven door and remove literature
pack and oven racks.

Remove Installation Instructions from
literature pack and read them carefully
before you begin.

Be sure to place all literature, Owner’s
Manual, Installations, etc. in a safe place
for future reference.

Remove packaging materials.
Check behind hinges and under
false bottom. Remove labels on the
outside of the door, plastic on trims
and panel, all tape around the oven,
and any shipping screws securing
the oven to the base pad.

Door removal is not a requirement for
installation of the product, but is an
added convenience. To remove the door:

Open the oven door as far as it will go.

Push both hinge
locks down toward
the door frame,
to the unlocked
position. This may
require a flat blade
screwdriver.

NOTE: The oven door is very heavy. Be sure
you have a firm grip before lifting the oven
door off the hinges. Use caution once the
door is removed. Do not lay the door on its
handle. This could cause dents or scratches.

Installation Instructions

Pre-Installation Checklist

Hinge 

Unlocked 

Position

Hinge

Slot

Hinge

Arm

ALL INSTALLATION INFORMATION
ON THE FOLLOWING PAGES IS TO
BE USED FOR SINGLE AND DOUBLE
OVEN INSTALLATION!

DO NOT LIFT THE DOOR

BY THE HANDLE!

Place hands on both sides of
the door, and close the oven
door to the removal position,
which is most of the way closed.

Lift door up and
out until the
hinge arms
clear the slots.

Hinge
Unlocked
Position

Hinge
Slot

Hinge
Arm

Hinge Clears Slot

Place the oven on a table or platform
even with the cutout opening. (Platform
must support 150 lbs. [68 Kg] single,
275 lbs. [124 Kg] double.)

Remove the bottom trim from the top
of the oven. It will be installed at the end
of the installation process. The trim is
wrapped separately and taped to
the top of the unit.

EASY INSTALLATION OF YOUR NEW 

30" WALL OVEN

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

FOR YOUR SAFETY

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

ELECTRICAL REQUIREMENTS

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

FOR YOUR SAFETY

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

ELECTRICAL REQUIREMENTS

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

FOR YOUR SAFETY

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

ELECTRICAL REQUIREMENTS

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

FOR YOUR SAFETY

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.

OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

ELECTRICAL REQUIREMENTS

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 

carefully.
IMPORTANT- Save these 

instructions for local inspector

’s use.

IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.

Note to Installer- Be sure to leave 
these instructions with the consumer.

OWNER- Keep these instructions 
for future reference.

Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

FOR YOUR SAFETY

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

ELECTRICAL REQUIREMENTS

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).
Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

FOR YOUR SAFETY

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

ELECTRICAL REQUIREMENTS

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).
Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

FOR YOUR SAFETY

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

ELECTRICAL REQUIREMENTS

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).
Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

EASY INSTALLATION OF YOUR NEW 

30" WALL OVEN

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

FOR YOUR SAFETY

Before you begin-Read these instructions completely and carefully.
IMPORTANT- Save these instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave these instructions with the consumer.
OWNER- Keep these instructions for future reference.
Note- This appliance must be properly grounded (if applicable).

ELECTRICAL REQUIREMENTS

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).
Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

Before you begin-Read these 
instructions completely and 
carefully.
IMPORTANT- Save these 
instructions for local inspector’s use.
IMPORTANT- OBSERVE ALL 
GOVERNING CODES AND ORDIANCES.
Note to Installer- Be sure to leave 
these instructions with the consumer.
OWNER- Keep these instructions 
for future reference.
Note- This appliance must be 
properly grounded (if applicable).

Oven Racks

Literature
Pack

Summary of Contents for JKP70BMBB









































Reviews:

No comments

Brands by name

Popular brands

Load more brands