OVEN CONTROL, CLOCK
To Set the Clock
The clock must be set for the automatic oven timing
1. Press the CLOCK pad.
functions to work properly. The time of day cannot be
CLOCK
changed during a Timed Baking or Self-Cleaning
cycle.
2. Press the INCREASE or DECREASE
pad to set the time of day.
3. Press the CLOCK pad to start.
Timer
To Set the Timer
The timer is a minute timer only.
1. Press the TIMER ON/OFF pad.
The timer does not control oven operations.
TIMER
ON/OFF
The maximum setting on the timer is 9 hours and
55 minutes.
2. Press the INCREASE or DECREASE pad to set the
amount of time on the timer.
The timer will start automatically within a few seconds
of releasing the INCREASE or DECREASE pad. The
timer, as you are setting it, will display seconds until
one minute is reached. Then it will display minutes
and seconds until 60 minutes is reached.
After 60 minutes, it will display hours
now
appears in the display) and minutes until the
maximum time of 9 hours and 55 minutes is reached.
To Reset the Timer
To Cancel the Timer
If “TIMER” is displayed, press the INCREASE or
Press and hold the TIMER ON/OFF
until the
DECREASE pad until the desired time is reached.
word “TIMER” disappears from the display.
If “TIMER” is not displayed, press the TIMER
ON/OFF pad first. then
the instructions above
to set the timer.
End of Cycle Tone
Power Outage
The End of Cycle tone is a series of three beeps
After a power outage, when power is restored, the
followed one
every six seconds. If you would
display
flash and time shown will no
be
like to remove the
that beeps every six seconds,
correct-for example, after a 5-minute power
press and hold the CLEAR/OFF pad for seconds.
interruption the clock will be 5 minutes slow. The
To return the signal that beeps every six seconds,
display flashes until the clock is set.
hold the CLEAR/OFF
for 10 seconds.
All other functions that were in operation when the
power went
will have to be programmed again.
7
