background image

27

GE offers, free of charge, a

brochure to assist in planning a

barrier-free kitchen for persons

with limited mobility. 

Consumers with impaired hearing or speech who have

access to a TDD or a conventional teletypewriter may

call 800-TDD-GEAC (800-833-4322) to request

information or service.

We’ll Be There

With the purchase of your new GE appliance, receive the assurance that if you ever need

information or assistance from GE, we’ll be there. All you have to do is call—toll-free!

In-Home Repair Service

800-GE-CARES (800-432-2737)

A GE consumer service professional will provide expert repair service,

scheduled at a time that’s convenient for you. Many GE Consumer Service

company-operated locations offer you service today or tomorrow, or at your

convenience (7:00 a.m. to 7:00 p.m. weekdays, 9:00 a.m. to 2:00 p.m. Saturdays).

Our factory-trained technicians know your appliance inside and out—so most

repairs can be handled in just one visit.

GE Answer Center®

800.626.2000

Whatever your question about any GE major appliance, GE Answer Center

®

information service is available to help. Your call—and your question— will be

answered promptly and courteously. And you can call any time. GE Answer

Center

®

service is open 24 hours a day, 7 days a week.

Service Contracts

800-626-2224

You can have the secure feeling that GE Consumer Service will still be there

after your warranty expires. Purchase a GE contract while your warranty is still

in effect and you’ll receive a substantial discount. With a multiple-year contract,

you’re assured of future service at today’s prices.

Parts and Accessories

800-626-2002

Individuals qualified to service their own appliances 

can have parts or accessories sent directly to their home.

The GE parts system provides access to over 47,000

parts…and all GE Genuine Renewal Parts are fully

warranted. VISA, MasterCard and Discover cards 

are accepted.

User maintenance instructions contained in this guide
cover procedures intended to be performed by any user.
Other servicing generally should be referred to qualified
service personnel. Caution must be exercised, since
improper servicing may cause unsafe operation.

For Customers With Special Needs…

800.626.2000

SINGLE CONTROL
FAUCET

TBXTOLITE
ON WALL

6’  10"

5"

8"

6"

5"

7"

1’ 0"

R SHALLOW DEPTH SINKS (6") WITH REAR DRAIN.

   SINK SHOULD ALSO BE UNDERCOATED

2’  10"

3’  

1/8

"

SCALE 1’

=

1"

SECTION A-A

FLUORESCENT
FIXTURE
THIS LIGHT CAN
BE INSTALLED
IN BOTTOM OF
WALL CABINETS

2’  6"

Befor

e Y
ou Call for Service

Consumer Services

Summary of Contents for JGP645





























Reviews: