11
GRILL MODULE
The grill consists of two black grill grates and a grill burner. Only install
the grill on the left side of your cooktop.
To Install Grill Module
1.
Before installing grill components, be certain
control knobs are in the OFF position.
2.
Position the grill burner with mixer tube openings
toward the orifices. Slide the burner towards the
orifices until the igniter is in between front and rear
grill sections. Lower into place until side openings
are resting on the burner support pins.
3.
Place the grill grates on the top of the cooktop.
Surface Burner
Module
Grill Module
To Remove Grill Module
1.
Remove grill components once they are cool.
Be sure control knobs are in the OFF position.
2.
Remove grill grates.
3.
Remove grill burners.
NOTE:
Before using the grill for the first time, heat
the grill burner to remove the protective shipping
coating. Heat the grill on HI for 10 minutes and use
the vent system to remove any additional smoke
during cooling.
Summary of Contents for JGP389
Page 7: ...7 NOTES...
Page 39: ...7 Notas...
