GE JGGB27, Assembly Instructions Manual

Page: 10 / 16

10
•
Place the end of the
LP tank retainer
in the hole
in the base. Flex the retainer and place the other
end in the other hole in the base. Repeat for the
other side.
ATTACH THE LP TANK RETAINERS
13
•
Your grill is designed
to be used with an LP
gas tank equipped
with the new
QCC-1
Quick Closing
Coupling
system
and the new
OPD handwheel.
•
The QCC-1 system
is recognizable by
the external threads
on the inlet port of
the valve.
•
The OPD handwheel
is recognizable by its
shape as shown.
•
The LP gas tank used with this grill must
NOT
have
a capacity larger than 20 lbs. (9kg).
•
Approximately: 18
″
(46 cm) high
12
″
(31 cm) diameter
•
These tanks are available from your local gas
grill dealer.
WARNING:
Make sure that the cylinder
valve on the LP tank is closed.
Close by turning clockwise.
1.
Place the
LP tank
on the grill base with the LP tank
connector facing to the right of the grill.
2.
Center the LP tank and lower the retainers into
place around it.
MOUNT THE LP TANK
(not included—obtain locally)
14
Assembly Instructions
LP tank
retainer
Right side
Back of grill
QCC1
¤
NEW OPD
HANDWHEEL
O
P
EN
C
LO
S
E
LP-G AS
OP D
LP tank
valve