GE JGB910 and, Owner'S Manual And Installation Instructions

Page: 14 / 60

Operating Instructions
Safety Instructions
Installation Instructions
Troubleshooting T
ips
Customer Service
14
Special features of your oven control (cont.).
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour
military time clock or black-out the clock
display, follow the steps below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
CLOCK
pad once. The
display will show
12 hr.
If this is
the choice you want, touch the
START pad.
Touch the
CLOCK
pad again to change
to the 24 hour military time clock. The
display will show
24 hr. If this is the choice
you want, touch the
START
pad.
Touch the
CLOCK
pad again to black-out
the clock display. The display will show
OFF. If this is the choice you want, touch
the
START
pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
Control Lockout (on some models)
Your control will allow you to lock out the touch
pads so they cannot be activated when touched
or cleaning the glass panel.
To lock the controls:
Touch the
9
and
0
touch pads at the
same time for 3 seconds until the
control beeps twice. The display will
show
LOC
continuously and the time
of day if not blacked out.
NOTE: All cooking and timing functions will be
cancelled when locking out the control.
To unlock the control, touch the
9
and
0
touch pads at the same time
for 3 seconds until the control beeps
twice, and
LOC
will be removed from
the display.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.
This feature can only be used when timed
cooking.
To activate this feature, follow the steps
below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
COOKING TIME
pad. The
display will show
Hld OFF.
Touch the COOKING TIME pad again
to activate the feature. The display
will show
Hld ON.
Touch the
START
pad to activate
the cook and hold feature and
leave the control set in this special
features mode.