6
Oven Control, Clock and Timer Features and Settings
BAKE/TEMP RECALL Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode—you can
change the oven temperature at this point.
Glows when the oven is in bake mode.
START/ON Pad
Must be touched to start any cooking
function.
Display
Shows the time of day, oven temperature
and whether the oven is in the bake or broil
mode. The display will show
PRE
while
preheating. When the oven reaches the
selected temperature, the oven control will
beep and the display will show the oven
temperature.
If “F– and a number or letter” flash in the display and the
oven control signals, this indicates a function error code.
The time of day will flash in the display when there has
been a power outage. Reset the clock.
Touch the CLEAR/OFF pad.
Allow the oven to cool for
one hour. Put the oven back into operation. If the function
error code repeats, disconnect the power to the range and
call for service.
KITCHEN TIMER ON/OFF Pad
Touch this pad to select the timer feature.
Then press
+
and
–
pads to adjust time.
TIMER Light
Flashes while in edit mode—you can
change the set time at this point. Glows
when the timer has been activated. Flashes
again when the time has run out until the
control is reset.
CLOCK Pad
To set the clock, press this pad twice and
then press the
+
and
–
pads. The time of
day will flash in the display when the oven
is first turned on.
Throughout this manual, features and appearance may vary from your model.
Using the oven controls.
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
