ge.com
19
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Problem
Possible Causes
What To Do
Oven temperature too
Oven thermostat
•
See the
Adjust the oven thermostat—Do it yourself!
hot or too cold
needs adjustment.
section.
Oven will not work
Plug on range is not
•
Make sure electrical plug is plugged into a live,
completely inserted in
properly grounded outlet.
the electrical outlet.
A fuse in your home may
•
Replace the fuse or reset the circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls improperly set.
•
See the
Using the oven
section.
“Crackling” or
This is the sound of the
•
This is normal.
“popping” sound
metal heating and cooling
during the cooking functions.
“F – and a number
You have a function
•
Press the
CLEAR/OFF
pad. Put the oven back into
or letter” flash
error code.
operation.
in the display
If the function code repeats.
•
Disconnect all power to the range for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
Display flashes “bAd”
The installed connection
•
Contact installer or electrician to correct miswire.
then “linE” with a
from the house to the unit
loud tone
is miswired.
Display goes blank
A fuse in your home may be
•
Replace the fuse or reset the circuit breaker.
blown or the circuit
breaker tripped.
The clock is turned off from
•
See the
Using the clock and timer
section.
showing in the display.
Display flashes
Power failure.
•
Reset the clock.
Unable to get the
Oven control pads were
•
The
BAKE
and
BROIL HI/LO
pads must be pressed
display to show “SF”
not pressed properly.
at the same time and held for 3 seconds.
Power outage,
Power outage or surge.
•
Reset the clock. If the oven was in use, you must reset
clock flashes
it by pressing the
CLEAR/OFF
pad, setting the clock
and resetting any cooking function.
