GE JCB905 Owner'S Manual And Installation Instructions Download

Page: 27 / 48

Safety Instructions

Operating Instructions

Care and Cleaning

oubleshooting T

ips

Consumer Support

www.GEAppliances.ca

Tone Volume

This feature allows you to adjust the tone volumes
to a more acceptable volume. There are three
possible volume levels.

Touch the

BROIL HI/LO

and

BAKE

pads at the same time for 3 seconds,
until the display shows

Touch the

OVEN LIGHT ON/OFF

pad.

The display will show

2 BEEP

. This is

the middle volume level.

Touch the

OVEN LIGHT ON/OFF

pad

again. The display will show

3 BEEP.

This is the loudest volume level.

Touch the

OVEN LIGHT ON/OFF

pad

again. The display will show

1 BEEP

This is the quietest volume level.

For each time the level is changed,
a tone will sound to provide an
indication of the volume level.

Choose the desired sound level

(1 BEEP, 2 BEEP, 3 BEEP)

Touch the

START

pad to activate

the level shown.

12-Hour, 24-Hour or Clock Blackout

Your control is set to use a 12-hour clock.

If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.

Touch the

BROIL HI/LO

and

BAKE

pads at the same time for 3 seconds
until the display shows

SF.

Touch the

CLOCK

pad once. The

display will show

12 hr.

If this is

the choice you want, touch the

START

pad.

Touch the

CLOCK

pad again to

change to the 24 hour military time
clock. The display will show

24 hr.

If this is the choice you want, touch
the

START

pad.

Touch the

CLOCK

pad again to black

out the clock display. The display will
show

OFF.

If this is the choice you

want, touch the

START

pad.

NOTE:

If the clock is in the black-out mode you

will not be able to use the Delay Start function.

Auto Recipe

™

Conversion

(on some models)

When using convection bake, the Auto Recipe

™

Conversion feature will automatically convert
entered regular baking temperatures to convection
baking temperatures.

This feature is activated so that the display will
show the actual converted (reduced) temperature.
For example, if you enter a regular recipe
temperature of 350°F and press the

START

pad,

the display will show

CON

and the converted

temperature of 325°F.

To deactivate the feature:

Press the

BAKE

and

BROIL HI/LO

pads

at the same time for 3 seconds, until
the display shows

Press the

CONVECTION BAKE

MULTI/1 RACK

pad. The display

will show

CON ON

. Press the

CONVECTION BAKE MULTI/1 RACK

pad

again. The display will show

CON OFF

Press the

START

pad.

To reactivate the feature, repeat steps
1–3 above but press the

START

pad when

CON ON

is in the display.

Summary of Contents for JCB905

















































Search results

Summary of Contents for JCB905

Reviews:

Related manuals for JCB905

Brands by name

Popular brands

GE JCB905, Owner'S Manual And Installation Instructions

Search results

Summary of Contents for JCB905

Reviews:

Related manuals for JCB905

Brands by name

Popular brands