background image

Using the timed baking and roasting features.

22

Operating Instr

uctions

Installation Instr

uctions

Safety Infor

mation

Tr

oubleshooting T

ips

Customer Ser

vice

Do not latch the oven door during timed cooking. The latch is used 
for self-cleaning only.

NOTE: 

Foods that spoil easily, such as milk, eggs, fish, stuffings, poultry and pork, should not be

allowed to sit for more than 1 hour before or after cooking. Room temperature promotes the growth
of harmful bacteria. Be sure that the oven light is off because heat from the bulb will speed harmful
bacteria growth.

How to Set an Immediate Start and 
Automatic Stop

Make sure the oven clock shows the correct time of day. 

Press 

COOK TIME ON/OFF.

Using the 

HOUR

and 

MIN.

pads, enter the length of

cooking time.

Turn the Oven Temperature knob to the desired
temperature.

The display will show the cooking time remaining. When
the oven reaches the set temperature, a tone sounds. 

When the oven automatically turns off the 

AUTOMATIC

OVEN

light will flash and the oven will signal. Turn the

oven control to

OFF

to stop the flashes and signal.

3

2

1

COOK

TIME

ON/OFF

START

TIME

ON/OFF

How to Set a Delay Start and Automatic Stop

Make sure the oven clock shows the correct time of day. 

Press 

COOK TIME ON/OFF.

Using the 

HOUR

and 

MIN.

pads, enter the length of

cooking time.

Press 

START TIME ON/OFF.

Using the 

HOUR

and 

MIN.

pads, enter the time you

want cooking to start.

Turn the Oven Temperature knob to the desired
temperature.

When the oven automatically turns off the 

AUTOMATIC

OVEN

light will flash and the oven will signal. Turn the

oven control to 

OFF

to stop the flashes and signal.

5

4

3

2

1

COOK

TIME

ON/OFF

START

TIME

ON/OFF

START

TIME

ON/OFF

Summary of Contents for JBP60

















































Reviews: