GE IO61X-BAT-KIT, Safety And Quick Start Manual

Page: 6 / 241

Safety and Quick Start Guide IO61X-BAT-KIT
Page 6 of 11
[EN] English – 109M7337 Rev -
50ABL001 RECHARGEABLE BATTERY CHARGER WARNINGS

Do not disassemble or modify the charger module or DC Power Supply.
The equipment is equipped with built-in safety/protection features. Should
these features be disabled, the battery pack under charge can leak
electrolyte, overheat, emit smoke, burst and/or ignite.

If recharging operation fails to complete even when a specified recharging
time has elapsed, immediately stop further recharging. Otherwise, battery
electrolyte leakage, overheating, smoke emission, bursting and/or ignition
can occur.

The equipment incorporates built-in safety devices. Do not use it in a
location where static electricity (greater than the manufacturer’s
guarantee) may be present. Otherwise, the safety devices can be
damaged, possibly leading to overheating, smoke emission, bursting
and/or ignition.

The guaranteed recharging temperature range is 10°C to +45ºC. A
recharging operation outside this temperature range can lead to battery
electrolyte leakage and/or overheating of the battery pack and may cause
damage to it.

Store the equipment in a location where children cannot reach it. Also,
make sure that a child does not take the battery pack out of the
equipment.

Before use, carefully study these Precautions. For further information
contact the nearest distributor or representative. Retain the original
product literature for future reference.

For recharging procedures, refer to the Operation Manual of your
DPI611/612 device.

Do not charge a battery if the battery displays rust, a bad odour,
overheating and/or other irregularities. If the battery is new, it must be
returned to the supplier or vendor.