GE ImageQuant LAS 4000 User Manual Download Page 34

Page: 34 / 136

Operation

Step

Wait until the CCD has reached the preset cooling temperature and is ready for use.

TIP:

• The instrument will be ready in a few minutes. The power LED on the instrument is

lit blue when the instrument is ready.

• Method/Tray position and Focusing can be prepared even if the CCD has not cooled

completely.

• The Start button can be clicked even when the CCD is not completely cooled with

the EtBr trans method.

4.3 Calibration

Ensure that the ImageQuant LAS 4000 is properly calibrated. See

Section 5.12.1 CCD Calibration, on

page 104

and

Section 5.12.2 Flat Frame Calibration, on page 105

4.4 Placing the sample

This section describes how to choose an appropriate sample tray, and how to place the sample for
exposure.

1 Select a sample tray suitable for the type of exposure to be performed.

Tray

Sample type

Detection

Epi tray

Membrane

Chemiluminescence

Bioluminescence

NP tray

Titer plate

ImageQuant LAS 4000 User Manual 28-9607-42 AB

4 Operating the ImageQuant LAS 4000

4.2 Preparation for exposure

Summary of Contents for ImageQuant LAS 4000









































































































































Search results

Summary of Contents for ImageQuant LAS 4000

Reviews:

Brands by name

Popular brands

GE ImageQuant LAS 4000, User Manual

Search results

Summary of Contents for ImageQuant LAS 4000

Reviews:

Brands by name

Popular brands