49-60698-4
15
INST
ALLA
TION INSTRUCTIONS
Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS
(Continued)
4
ATTACH THE WATER VALVE TO
THE MACHINE COMPARTMENT
Ɣ/RFDWHWKHIHPDOH
connector plug. Plug the
female connector onto
the male terminals on
the water valve. Either
wire can go on either
terminal.
Ɣ)DVWHQWKHZDWHU
valve to the
cabinet by driving
the hex-head
VFUHZIURP
the kit through
the hole in the
bracket extension
and into the hole
in the cabinet.
5
INSTALL WATER LINE CLAMP
Ɣ$WWDFKWKH
water line clamp
VWUDLQUHOLHIIURPWKH
kit to the refrigerator. With
the clamp directly in line
with the water valve, drive
the
screw
IURPWKHNLW
through the
clamp
at the
indent into the back of the
cabinet.
Ɣ7KHPHWDOFODPSLVIRUWKHKRXVHZDWHUOLQH
VHH:DWHU/LQH,QVWDOODWLRQ,QVWUXFWLRQV,WLV
not to be used for the tubing from the water
valve up to the icemaker.
6
ROUTE AND ATTACH THE
PLASTIC WATER LINE
Ɣ)DVWHQWKHSODVWLFZDWHUOLQHWRWKHEDFNRIWKH
cabinet with
adhesive-backed fasteners
9
Adhesive-backed
fastener for plastic
water line
4
WATER VALVE INSTALLED
5HIHUWRWKH:DWHU/LQH,QVWDOODWLRQ,QVWUXFWLRQV
for connection to the home water supply. After
water line installation is completed, set the
icemaker power switch
to
ON
.
The icemaking cycle will not begin until the
icemaker and freezer compartment reach
operating temperature, then icemaking will
begin automatically.
8
REINSTALL THE COVER
5HLQVWDOOWKHFRPSUHVVRUFRPSDUWPHQWDFFHVV
FRYHU7KLVUHTXLUHVXVLQJWKHVFUHZV\RX
removed previously to reattach the cover to
the back of the refrigerator case. This must
be reinstalled for your refrigerator to function
properly.
WARNING
ELECTRIC SHOCK
HAZARD
Attach tubing clamp using existing hole only. DO
NOT drill into the refrigerator.
5
6
