GE IDP-1111 User Manual Download Page 108

Page: 108 / 114

Legend

User Manual

100

Figure 61. Legend web-based log in screen

9. At the Legend web-based firmware update page (

Figure 62

Click the

Browse

button to locate the filename of the existing software.

b. Click

File | Open

to populate the filename entry.

Click

Send File

Figure 62. Legend web-based firmware update page

10. At this point, the Legend graphical programming interface will appear on the security monitor screen

and messages will appear on both the computer and security monitors. You will know that the existing
software has been successfully prepared after you see:

•

A message similar to

Upgrade uploaded successfully, please wait while flash is updated

on the

computer monitor screen.

•

A refreshing message similar to

Beginning HTTP firmware update. Do not cycle power.

followed by a message similar to

Resetting camera. Please standby.

on the security monitor

screen. The

Please standby

message may appear and disappear so quickly that you may miss it.

Summary of Contents for IDP-1111



















































































































Search results

Summary of Contents for IDP-1111

Reviews:

GE IDP-1111, User Manual, Page: 108 / 114

Search results

Summary of Contents for IDP-1111

Reviews: