– 48 –
After the lid is removed, the lid lever arms can be slid
out from the hinge assemblies. They are the same,
so they cannot be mixed up.
The hinges can be removed without removing the
top cover.
1. Slide the backsplash toward the rear of the
washer to access the hinge mounting screws.
2. Slide a hand between the top cover and the tub
cover and grasp the hinge being removed.
3. Remove two 1/4 in. hex head screws that secure
the hinge to the top cover and slide the hinge
out.
The wire form hinges on the metal lids are held on
by a lid bushing. The lid bushing is secured to the
top cover with a Phillips head screw.
Lid Hinge
Wire Form
Hinge Bushing
Impeller
The impeller moves clothes around in the basket.
It takes the place of a tall agitator. Impellers are
designed to work best with moving material around
in the basket with low water levels.
Impeller Removal
1. Carefully remove the center cap from the
impeller. This can be done with a pocket
screwdriver or putty knife.
Agitators
7KHUHDUHWKUHHGLȺHUHQWW\SHVRIDJLWDWRUVIRUWKH
models listed in this manual. An impeller, a dual
stage agitator, and a single stage agitator. Each
works uniquely to give the desired washability.
(Continued next page)
