GE HGP6070E, Use & Care Manual

Page: 41 / 56

41
Consult the table to find out which function is
the most suitable for the food to be cooked.
Validate by pressing , and the oven will
start cooking. 2.9 Changing the temperature . When
you have selected the program, press .
Change the temperature by pressing or .
Validate by pressing . If the ºC button is
pressed and held down, the real temperature
inside the oven will appear on the display.
Note: The cooking process can be stopped at
any time by pressing . To switch off the
oven, press .
Time features
2.10 Set cooking time . When the program
has been selected and the temperature
changed if necessary, press until ap-
pears on the display (2.10.1) Adjust the time
by pressing or and validate by pressing
(2.10.2). The countdown will start immedi-
ately after adjustment.
When the cooking process ends, a beep will
sound. Press any button to stop the beep.
2.11 Selecting the end time . Select a
cooking function, temperature and cooking
time (2.10). Press until (2.11.1) appears
on the display. Press or to adjust the
end of cooking time and validate by pressing
(2.11.2). While the oven is on hold, a mov-
ing dotted line will appear on the dis-
play (2.11.3). The cooking process will end at
the time indicated. When it ends, a beep will
sound. Press any button to stop the beep.
Note: During the cooking process, the ther-
mometer will flash. When the selected
temperature is reached, a beep will sound.
2.12 Automatic switch-off . If you forget to
switch off the oven, it will switch off auto-
matically after a certain time. If the tempera-
ture is lower than 100 ºC, the oven will switch
off after 10 hours. If the temperature is
higher than 100 ºC, it will switch off after 3
hours.
2.13 Celeris function . Recommended for
dishes requiring preheating.
2.14 Residual heat . If the oven is still hot
after it has been switched off, will appear
on the display. It will only disappear when
the temperature inside the oven drops below
60 ºC.
Non-pyrolytic oven: Switch on the oven and
select a function (2.9). Press (2.13.2). The
oven will quickly reach the temperature re-
quired for this function. When the tempera-
ture is reached, the symbol will disappear.
You can now place the food in the oven.
Note: The Celeris function is not applicable to
some programs.
Pyrolytic oven: Select a function (2.9). Press
and then press again and hold it down
for 5 seconds until appears on the display.
Validate by pressing . (2.13.1) When the
temperature is reached, will disappear.