8
29-6435
Display
Deep Fill
Temperature
C
D
E
Getting started - Washer
USING THE
W
ASHER
Cycle Options
F
Start/Pause
Press
Start
to begin the cycle. With the lid closed pressing
Start
again will pause the cycle and
Status
lights will blink.
To continue the cycle, close the lid and press
Start
again. The water fill will continue with the lid opened, except when
Precise Fill
(on some models) is selected as the load size. The lid
must be closed
to continue filling when
Precise Fill
(on some models) is selected.
If the lid is opened during the cycle, the cycle will pause and the
Status
lights will blink. To resume the cycle, close the
lid and press
Start
.
If the machine is paused for more than 24 hours, the cycle will be cancelled. To stop the cycle, turn the Cycle Selector
to the
Off
position.
NOTE:
Machine will automatically cancel and drain when water is present and the lid is left open
for 15 minutes or the unit is left in a paused state for 24 hours with the lid closed. Select cycle and press
Start
to begin
new cycle.
B
Connected
- it will be on once the washer is connected with your app.
WiFi
- It will be on once your washer is connected to WiFi.
Remaining Time:
Will display the time left for the washer to complete the current cycle.
Lid Lock
- It will be on while the lid is locked.
Select the
Deep Fill
feature for loads where extra water is needed.
Press the
Deep Fill
button once before starting the cycle to add an incremental amount of water
to the wash load. Holding the
Deep Fill
button for 3 seconds will provide the deepest fill level
possible; this will increase cycle time due to the additional time it takes to fill the washer.
To cancel the option if desired, press the
Deep Fill
button again.
NOTE:
The
Deep Fill
button can also be pressed after the washer has completed filling and is in
the wash phase if additional water is desired. To stop the extra fill, press the
Deep Fill
button
again and the water will stop.
Select the water temperature for the washer cycle pressing the
Temp
button. Always follow fabric manufacturer's care label or
instructions when laundering.
Tap Cold*
uses incoming tap water, which can provide energy savings. For all others temperature selections, a mixture of hot
and cold water is used to achieve the ideal temperature for each temperature setting.
*Please note that some detergents do not fully dissolve in very cold water. If you experience this, it is recommended you choose
a setting other than
Tap Cold
.
Wi-Fi
Press the
Temp
button for 3 seconds to activate the Wi-Fi connection. If the washing machine is already connected (Wi-Fi light
on) press 3 sec to disconnect the Wi-Fi connection (LED blinks while it is in the process of connection).
Auto Soak
This option begins- with a brief agitation, soaks for a specified period, then moves through the rest of the cycle automatically.
Repeated pressing of the
Soak
button will scroll through 15 min, 30 min, 60 min, 2 hours (2h) selections and then return to 0
soak minutes.
Deep Rinse
Set this option to provide a deep rinse or when using fabric softener. It may change other settings (e.g.,
Spin
may go to a
higher setting) to maximize performance.
