2
A
B
• Slide “Z” shaped trim under the
escutcheon.
• Place bottom trim against the bottom
of the door panel and drive center
screw, then left and right screws.
3 INSTALL DOOR PANEL TRIM
AND CUSTOM PANEL
• Remove the protective plastic covering
from side trim pieces.
2 RETIRE EL CONJUNTO DEL
PANEL DE ACCESO INFERIOR
• Remove the two screws below the access
panel. Retain screws.
• Loosen the two screws located between the
door and the access panel. Do not attempt
to remove these screws. They are secured
to the access panel with washers.
• Remove the access panel assembly from
the dishwasher.
• Remove the toekick and set aside.
NOTE:
Do not remove the insulation behind
the access panel or toekick.
“Z” Trim
Loosen 2 Screws
Escutcheon
Door
Panel
Access Panel
Toekick
Loosen 2 Screws
Escutcheon
Door
Panel
Access Panel
Toekick
