GE GPF325B Installation Instructions Manual Download Page 1

Installation
Instructions

GPF325 SERIES KITS

1/4" Custom Dishwasher Door

and Access Panel Kit

GPF325A, Almond Trim Kit

GPF325B, Black Trim Kit

GPF325C, Bisque Trim Kit

GPF325W, White Trim Kit

WARNING:

To prevent electric shock, disconnect electrical
power supply to dishwasher before changing
panels. Do not operate dishwasher while
changing panels or when lower access panel
assembly is removed.

TOOLS AND MATERIALS
REQUIRED:

• 1/4" socket driver
• Phillips screwdriver
• Electric drill
• 1/8" drill bit
• Masking tape
• Safety glasses
• Center punch
• Gloves to protect against sharp edges

The GPF325 trim kits provide for the installa-
tion of 1/4" thick custom door and access
panels.

KIT INCLUDES:

• Left, right and bottom door trim
• Top and bottom access panel trim
• Color matched screws

Before you begin

Read these instructions completely
and carefully.

IMPORTANT

 

–  

Save these instructions

for local inspector’s use.

IMPORTANT

 

– Observe all governing

codes and ordinances.

Note to Installer

 – 

Be sure to leave these

instructions with the Consumer.

Note to Consumer

 

– Keep these instructions

with your Owner’s Manual for future
reference.

STOP

1 CUT 1/4" THICK CUSTOM

PANELS TO SIZE

• Cut door panel and access panel to the
dimensions shown.

NOTE: 

The trim provided will conceal the cut

edges of the panels.

1/4" Thick

Door Panel

23-9/16"

3-11/16"

18-7/8"

1/4" Thick Access Panel

Summary of Contents for GPF325B









Reviews: