Chapter 4. Configuration
GFK-3030
December 2017
39
4.9
Discovery Tool
If desired, the operator may use the
Launch Discovery Tool
of PME to automatically detect all connected
network devices. This operation may only be performed once all network devices have been interconnected
and powered up.
Figure 33: Launch Discovery Tool
As shown in Figure 33, select the network controlling device (here the PNC001 in Slot 6 is highlighted). Then
right-click and select
Launch Discovery Tool
on the resulting drop-down menu. This initiates a real-time
exploration of the connected network (Figure 34).
Figure 34: Discovery Tool in Progress
When the Discovery Tool scan completes, a listing of all connected devices is produced, along with status
indications.
Summary of Contents for GLM064
Page 137: ......
