22
About the dryer control panel.
Power
Press to “wake up” the display. If the display is active, press to put the dryer in the standby mode.
NOTE:
Pressing
Power
does not disconnect the appliance from the power supply.
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match
the dry setting with the loads.
Sensor Cycles
Description
Mixed Loads
For loads consisting of cottons and poly-blends.
Cottons
For cottons and most linens.
NOTE
:
Energy star®
models are tested on
Cottons
whit
default settigs.
Delicates
For lingerie and special-care fabrics
Speed Dry
For small loads that are needed in a hurry, such as sports or school uniforms. Can also be
used if the previous cycle left some items damp, such as collars or waistbands.
1
2
Timed Dry Cycles
Description
Air Fluff/No Heat
Provides 10 minutes of tumbling time without heat.
DeWrinkle
Provides 20 minutes of drying to assist with dewrinkling items that are dry or slightly
damp. This cycle is not recommended for delicate fabrics.
Time Dry
Use to set your own dry time.
Time Dry
is also recommended for small loads
To use Time Dry:
1.
Turn dry cycle dial to
Time Dry
.
2.
Increase the drying time by pressing the
Time Dry
button.
Note:
This button only increases the time. When max time is reached, pressing the button again will reset
the counter to the lowest setting.
3.
Select the
Temp.
4.
Close the door.
5.
Press
Start
.
3
www.GEAppliances.ca
Summary of Contents for GFD40
Page 42: ...42 Notes www GEAppliances ca ...