GE GeoSpring GT50C10BAM, Owner'S Manual And Installation Instructions

Page: 10 / 48

49-6000121 Rev. 0
OPERA
TING INSTRUCTIONS
Operating Instructions
Operation
If the homeowner cannot get water to flow from the hot
water lines, check all shut off valves and ensure the
combined non-return/safety valve has been installed
correctly, as it has an integrated check valve. To
determine whether the GeoSpring Solar system is
working, measure the water temperature returning from
the system on a sunny day. The output temperature
should be warmer than the input temperature.
WARNING
BURN HAZARD
Do NOT touch water heater pipes or surfaces,
which can be hot. Failure to follow these
instructions can result in severe burns.
Increasing Efficiency
To increase the efficiency of the GeoSpring Solar
system:
Ɣ,ISRVVLEOHXVHKRWZDWHULQWKHHYHQLQJ)RUH[DPSOH
take showers in the evening rather than during the
day.
Ɣ7KHSHUIRUPDQFHRIWKH*HR6SULQJ6RODUV\VWHP
in the Northern Hemisphere is optimized when it is
mounted facing true south. Performance, however,
VXIIHUVYHU\OLWWOHZKHQLWLVRULHQWHGQRPRUHWKDQž
(DVWRUž:HVWRI7UXH6RXWK
Ɣ
The collector should be in unobstructed direct
VXQOLJKWEHWZHHQDPDQGSPRQDQ\GD\
of the year.
System Operating Pressure
The maximum operating pressure in the water circuit
PXVWEHOLPLWHGWR36,DWDOOWLPHV,QVWDOODSUHVVXUH
reducer if necessary.
Leaving the System Unused
If the GeoSpring Solar system is to be unused for more
than two weeks, such as absence due to vacation, it is
best to leave the system pressurized, filled with water,
and covered. If unused for longer periods, it is best to
drain the collector and the solar loop piping. The entire
V\VWHP0867EHFRYHUHGE\DOLJKWUHIOHFWLYHFORWKRUIRLO
to prevent damage due to overheating. An original cover
is available at your GeoSpring Solar system dealer.
NOTICE: Risk of Unit Damage
The tank must be full of water before removing
the film and turning on. The water heater warranty
does not cover damage or failure resulting from
operation with an empty or partially empty tank.