– 72 –
in this example, FA has no fault counts.
pressing the
DOWN
arrow button will step
through the individual fault codes and their
counts.
Fault code count of 3 shown.
Filter Light
Filter Light illuminates when:
•
The sensors detect a blockage or the
accumulated run time of the compressor is
greater than 3000 hours.
•
The control registers 5 fault counts. in the event
of a power loss, the fault code will decrease by 1
when power is restored.
When the filter light is illuminated, the sealed
system is locked out but the temperature and mode
LED stays at the set point.
(Continued Next page)
