Figure
3.
Mechanical counter installed in breaker.
9.
Reinstall the breaker top cover, ensuring that the
Trip Unit and aluminum accessory sleeve are
properly aligned with the cover. Tighten the four
#10-32
screws to
32
in-lbs.
10.
Replace the trim plate and tighten the four
#8-32
screws to
20
in-lbs.
11.
If it is a draw-out breaker, rack it back in.
__
Possible Cause
12.,
Apply control power to the accessories, then
follow the normal procedure to recharge the
springs and tum the breaker on.
Trouble-Shooting
The following guide is provided for trouble-shooting
and isolating common problems. It does not cover every
possible situation. Contact the ED&C Customer Support
Center at
800-843-3742
if any problem is not resolved by
these procedures.
Partially Obscure Counter Display
Figure
4.
Counter partially obscured in top cover window.
Corrective Action
The
Mechanical Counter does
not advance with operation of
the breaker.
The spring-loaded Mechanical
Counter arm is not above the tab on
the ON-OFF flag.
See step
6
of the installation instructions.
The first digit of the
Mechanical Counter is partially
obscured in the top cover
window, as in Figure
4.
The Mechanical Counter is out of
adjustment on the mounting plate.
Measure the interference. Remove the
breaker top cover and the Mechanical
Counter assembly. Loosen the two screws
holding the Counter to the mounting
plate. Slide the Counter over by the
amount of the interference. Tighten the
two Counter mounting screws to
10
in-lbs,
then reinstall the Counter as per the
installation instructions.
These instructions do not cover all details or variations in equipment nor do they provide for every possible
contingency that may be met in connection with installation, operation, or maintenance. Should further
information be desired or should particular problems arise that are not covered sufficiently for the
purchaser's purposes, the matter should be referred to the GE Company.
GE Electrical Distribution & Control
General Electric Company
41 Woodford Ave., Plainville, CT 06062
GEH-62808 0296
©
1996 General Electric Company
www
. ElectricalPartManuals
. com
