Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
Replacing the light bulbs.
ge.com
NOTE:
Turning the refrigerator off via the controls on the touch panel does not shut off electrical power to the
refrigerator.
Refrigerator Compartment—Upper Light
Unplug the refrigerator.
The bulbs are located at the top
of the compartment, inside the light
shield. On some models, a screw
at the front of the light shield will
have to be removed. On other models,
the screw is located in the pocket
located at the back of the shield.
To remove the light shield, on some
models, press in on the tabs on the sides
of the shield and slide forward and out.
On other models, just slide the shield
forward and out.
After replacing the bulb with an
appliance bulb of the same or lower
wattage, replace the light shield and
screw. When replacing the light shield,
make sure that the tabs at the back
of the shield fit into the slots at
the back of the light shield housing.
Plug the refrigerator back in.
Refrigerator Compartment—Lower Light
This light is located above the top drawer.
Unplug the refrigerator.
Lift the light shield up and pull it out.
After replacing the bulb with an
appliance bulb of the same or lower
wattage, replace the shield.
Plug the refrigerator back in.
Freezer Compartment
Unplug the refrigerator.
Remove the shelf just above the light
shield. (The shelf will be easier to
remove if it is emptied first.) Remove
the screw at the top of the light shield.
To remove the light shield, press in on
the sides, and lift up and out.
Replace the bulb with an appliance
bulb of the same or lower wattage,
and reinstall the light shield. When
reinstalling the light shield, make
sure the top tabs snap securely
into place. Replace the screw.
Reinstall the shelf and plug the
refrigerator back in.
15
Dispenser
Unplug the refrigerator.
The bulb is located on the dispenser
under the control panel.
Remove the light bulb by turning
it counterclockwise.
Replace the bulb with a bulb of the
same size and wattage.
Plug the refrigerator back in.
Tabs
Your light shield will look like
one of the following:
OR
