LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1)
Leveling legs adjust so the refrigerator is
firmly positioned on the floor and does not
wobble.
2)
Leveling legs serve as a stabilizing brake
to hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
Remove the grille by removing the two Phillips
head screws.
Turn the leveling legs
clockwise to raise
the refrigerator,
counterclockwise to lower
it.
CAUTION:
To avoid possible
personal injury or property damage,
the leveling legs must be firmly touching
the floor.
Replace the base grille by inserting the two
Phillips head screws.
10
A
Installation Instructions
SET THE CONTROLS
Set the controls to the recommended setting.
11
REMOVE PACKAGING, START
ICEMAKER
(icemaker models)
A)
Remove all tape, foam and protective
packing from shelves and drawers.
B)
Remove the tie downs from the freezer
baskets.
C)
Place half width basket onto drawer slides.
See About the freezer section for instructions.
Set the icemaker power switch to the
I (on)
position.
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (–9°C) or
below. It will then begin operation automatically. It
will take 2–3 days to fill the ice bin.
NOTE:
In lower water pressure conditions, the
water valve may turn on up to 3 times to
deliver enough water to the icemaker.
12
Power
switch
B
C
20
INSTALLING THE REFRIGERATOR
(cont.)
