6
49-60763-1
Temperature Control
USING THE FREEZER:
T
e
mperature
Control
This electronic temperature control is located on the
front of the freezer door. The temperature is factory-
preset to provide satisfactory food storage temperatures.
To adjust the temperature setting, press - to decrease
WHPSHUDWXUHVDQGWRLQFUHDVHWHPSHUDWXUHV$OORZ
several hours for the temperature to stabilize between
adjustments.
High Temp Alarm
This electronic control has a high temperature alarm
feature. An alarm will sound if the freezer temperature
is high. To silence the alarm, press
Alarm Reset
on the
control panel.
The
High Temp
will continue to be displayed on the
control panel until set temperature has been restored.
The alarm will sound again if the temperature is not
restored and remains high in six hours.
Turbo Freeze
To enable
Turbo Freeze
, press
Turbo Freeze
until
7XUER)UHH]H
ON
light turns on. The unit will be in
³7XUER)UHH]H´PRGHIRUKRXUVDQGWKH
ON
light for
7XUER)UHH]HZLOOVWD\LOOXPLQDWHG$IWHUWKHKRXUVLV
completed,
Turbo Freeze
turns off automatically. The
ON
light will be off to show that
Turbo Freeze
is off. To
exit
Turbo Freeze
EHIRUHWKHKRXUDXWRPDWLFVKXWRII
SUHVV7XUER)UHH]HXQWLO
ON
OLJKWIRU7XUER)UHH]HLVRII
Control Lock
To lock the controls, press Control Lock and hold for 3
seconds until the
ON
light for Control Lock turns on.
To unlock, press and hold
Control Lock
for 3 seconds.
The
ON
light for
Control Lock
turns off and the control
panel will be unlocked. Control setting cannot be
changed when the control is locked.
Power Fail
If a power outage has caused the internal temperature
to be high, the high temp alarm will sound and the
temperature display will flash. Pressing
Alarm Reset
on
the control will silence the alarm and stop the flashing,
but
High Temp
/('ZLOOVWD\RQXQWLO\RXUIUHH]HU
reaches a safe storage temperature.
If the internal temperature has been restored before you
press Alarm Reset, the sound alarm will stop on its own,
LJK7HPS/('ZLOOJRRIIDXWRPDWLFDOO\7KH
temperature display will continuing flashing to remind
you that a power outage has occurred. Press Alarm
Reset to stop the flashing.
Door Open Alarm
If your door has been left open for more than 2 minutes,
the control panel will display
Door Open
and will sound
DQDODUPXQWLOWKHGRRUKDVEHHQFORVHGRU'RRU2SHQ
is pressed on the control panel. If
Door Open
has been
pressed but the door has not been closed,
Door Open
will continue to be displayed on the control panel until
the door has been closed. If 10 minutes after
Door
Open
has been pressed, the door is still open, the door
open alarm will sound again.
C or F Setting
7RFKDQJHEHWZHHQ&RU)SUHVVDQGKROGWKHDQG
pads at the same time for 3 seconds.
Control Dormant
The control settings are displayed at normal condition.
Press and hold
Control Lock
and
Turbo Freeze
for
VHFRQGV7KHHOHFWULFFRQWUROZLOOHQWHULQWR'RUPDQW
Mode and will not show the control settings. The control
settings will be displayed for 30 seconds if one of the
buttons on the control is pressed or the door is opened
ZKLOHLQ'RUPDQW0RGH3UHVVDQGKROG
Control Lock
and
Turbo Freeze
for 3 seconds again will disable
'RUPDQW0RGH
°F
°C
Demo
ON
ON
High Temp
Door open
Hold 3 Sec
Turbo Freeze
Control Lock
Alarm Reset
High Temp Light
'RRU2SHQ/LJKW
Alarm Reset
Pad
7XUER)UHH]H/LJKW
Lock Controls Light
Increase Pad
'HFUHDVH3DG
