GE EWA4000BWW Owner'S Manual Download Page 6

Operating Instructions

Safety Instructions

Consumer Support

Troubleshooting T

ips

About controls features.

6

START

■ 

After you have selected a new cycle, press once to start the cycle.

■ 

Press twice to select the last cycle used and start the washer.

■ 

If the washer is running, press once to interrupt the cycle; press again to continue 
the cycle.

STOP

This pad should 

not

be used to interrupt or pause a cycle.

Pressing this pad will cancel the current settings and the settings will be lost.

Estimated Time Remaining

■ 

Displays the approximate time remaining until the end of the cycle.

■ 

If the estimated time remaining is more than 60 minutes, “1H” will flash in the
display, followed by the additional remaining minutes. When the time remaining is
less than 60 minutes, the timer will count down.

■ 

Cycle time is affected by how long it takes the washer to fill. This depends on the
water pressure in your home. The “smart” timer “learns” the amount of time it 
takes to fill your washer and adjusts the total time accordingly.

NOTE:

If 

PRESOAK

is selected and a follow up wash cycle is not chosen, two dashes 

will come up in the display.

E

ST. 

T

IME 

R

EMAINING

Spot Spray

Provides a short spray of water to allow you to dampen clothing when you pretreat stains.

Open the washer lid.

Press the 

SPOT SPRAY

button. (You will see a short stream of water.)

Dampen your soiled garment with the 

SPOT SPRAY 

option and rub your favorite

pretreatment product into soiled area.

NOTE: 

The 

SPOT SPRAY

option will not work if

■ 

the washer lid is down

■ 

the washer tub is filling

■ 

the water has already reached the level you selected.

3

2

1

The Bleach Signal is a reminder signal that can be turned on to remind you to add bleach at
the proper time in the wash cycle. Adding detergent and bleach at the same time reduces the
effectiveness of both the enzymes in the detergent and the chlorine in the bleach. By adding
bleach later in the wash cycle, you allow the detergent’s enzymes to remove dirt and stains first,
and then provide a more effective dose of liquid bleach to whiten and sanitize your clothes.

BLEACH SIGNAL 

(on some models)

Summary of Contents for EWA4000BWW

















Reviews: