Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
5
About Clothes Care Cycles.
GEAppliances.com
PRESOAK
To presoak a load and go straight into a wash cycle:
Select your wash cycle, press the
PRESOAK
pad, then press the
START
pad.
■
Starts with three minutes of agitation, then 12 minutes of soaking, followed by the
selected wash cycle.
■
Uses the speed and water temperature of your selected wash cycle.
To presoak a load without going straight into a wash cycle:
Press the
PRESOAK
pad. The washer will fill. You may change the automatic settings
if desired.
■
Three minutes of agitation is followed by up to 24 hours of soaking.
■
To soak less than 24 hours, press the
DRAIN & SPIN
pad or choose a wash cycle.
QUICK RINSE
(on some models)
Use this feature to quickly rinse chlorine, perspiration, stains, etc. out of clothes.
■
The washer fills with water, agitates for three minutes, drains and spins. You may
change the automatic settings if desired.
Q
UICK
RINSE
HANG DRY
(on some models)
If you air dry your clothes without the aid of a dryer, you may find that the slower final
spin speed of the
Hang Dry
setting produces fewer wrinkles in your clothing. This may
significantly reduce your ironing chore.
Appearance may vary.
CUSTOM CYCLE
Set up your favorite combination of settings and save them here for one-touch recall.
These custom settings cannot be set while a cycle is in progress.
To store a custom combination of settings:
1. Select a
O
NE
T
OUCH
setting.
2. Change
LOAD SIZE, SOIL LEVEL, TEMPERATURE, WASH SPEED
or
SPIN SPEED
to fit
your needs.
3. Select any
OPTIONS
you want.
4. Press and hold the
CUSTOM CYCLE
pad until the washer beeps to store your selection.
To recall your stored combination:
Press the
CUSTOM CYCLE
pad, then press
START
.
NOTE: DELAY 1-8 HRS.
cannot be used in
CUSTOM CYCLE
settings.
To reprogram the custom settings:
Repeat steps 1–4 above.
D
RAIN
& SPIN
DRAIN & SPIN
DRAIN & SPIN
any cycle at any time.