Cycle Chart
Model
Cycle
Water Usage (gal.)
Cycle Time (min.)
GSD3200J Series
Hot Start Option
1
3.4
26
Pots & Pans
10.9
61
Normal Wash*
6.8
61
Short Wash*
6.2
48
Rinse Only*
4.5
13
Drying/Plate Warmer
0.0
30
EDW1500J Series
Hot Start Option
1
1.7
33
GSD4000J Series
Pots & Pans
10.9
71
GSD4100J Series
Heavy Wash
9.3
71
GSD4200J Series
Normal Wash*
6.8
71
SSD3900J Series
China/Crystal
9.3
71
Short Wash*
6.2
58
Rinse Only*/Rinse & Hold*
3.0
13
Drying/Plate Warmer
0.0
30
* Normal Wash should be selected to run this cycle.
1
Hot Start Option adds water amount and cycle time shown when selected.
Note:
Not all models have every cycle listed.
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Energy Options
HI TEMP
Provides extra heat for best performance. It is used best with heavily soiled dishes.
WASH (ON)
HI TEMP
Turns
HI TEMP WASH
off.
WASH OFF
(on some models)
HEATED DRY
Turns the heating element on for fast drying. This option will extend the time of your wash cycle.
(ON)
Available on all wash cycles except
RINSE ONLY
. Adds approx. 32 minutes to the cycle.
HEATED DRY
Turns
HEATED DRY
off
.
Dishes air dry naturally and energy is saved
.
OFF
(on some models)
Cycles
POTS & PANS/
For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may be included.
HEAVY WASH
This cycle will not remove burned-on foods.
NORMAL WASH
For loads of everyday dishes, glasses and cookware with medium soils.
NOTE:
Many dishes have lighter soil than normal.
Choosing a cycle other than
NORMAL WASH
will save energy and water.
SHORT WASH
For quickly washing loads of everyday dishes with medium soils that have not dried on, such as loads consisting
mostly of glasses.
RINSE ONLY
For rinsing partial loads that will be washed later.
Do not use detergent.
PLATE WARMER
For warming clean dishes and serving plates. This cycle will take approximately 30 minutes.
HOT START
Preheats wash water to the correct temperature.
Start
Slowly turn the Dial to the
START
or
ON
position, or the selected cycle. Don’t turn it past the
START, ON
or cycle position, or you could accidentally miss a rinse.
There is a time delay between start-up and water fill so you will not hear any wash action right away.
■
Latch the door to begin the cycle.
Control Settings
GEAppliances.com
5
