10
SD Series Reference Manual (x710 Mode)
MDS 05-4670A01, Rev. E
NOTE:
To prevent moisture from entering the radio, do not mount the
case with the cable connectors pointing up. Also, dress all
cables to prevent moisture from running along the cables and
into the radio.
Transceiver dimensions are shown in Figure 8.
Figure 8. SD Transceiver Dimensions
Optional DIN Rail Mounting
The unit can be mounted with an optional 35 mm DIN Rail Mounting
Bracket Kit (Part No. 03-4125A04). Equipment cabinets and racks of
modern design often employ this type of mounting. Once the DIN
bracket is attached to the radio, it allows for quick installation and
removal of the radio from its mounting rail without the need for tools.
The DIN Rail bracket attaches to the unit’s case as shown in Figure 9.
The entire assembly then attaches to the mounting rail.
Figure 9. Attachment & Mounting of DIN Rail Bracket
(unit shown is for example only, and is not an SD Transceiver)
Step 1:
Attach the bracket using the
Step 2:
Clip the assembly onto the
DIN Rail. Removal is performed by
pulling down on the Release Tab.
Release Tab
two screws provided. (Attach to
the end opposite the unit’s connectors.)
Summary of Contents for DS-SD4-1
Page 10: ...viii SD Series Reference Manual x710 Mode MDS 05 4670A01 Rev E ...
Page 69: ...MDS 05 4670A01 Rev E SD Series Reference Manual x710 Mode 59 NOTES ...
Page 70: ...60 SD Series Reference Manual x710 Mode MDS 05 4670A01 Rev E ...
Page 74: ...MDS 05 4670A01 Rev E SD Series Reference Manual x710 Mode I 4 ...
