2.7 Jumper Settings
Jumper Configuration
Configure the jumpers based on the number of hard drives installed in the unit.
Do not throw away unused jumpers.
See section 2.2 to locate this block of jumpers.
2-6 Drives
8 Drives
Load 4
Load 3
Load 2
Load 1
Load 4
Load 3
Load 2
Load 1
After any drives are installed, replaced or removed, the
Reset Disk
Failure
command must be run from the
Supervisor Menu
for the
changes to be recognized by the DVSe.
NOTE
DVSe 14
0150-0178H
Summary of Contents for Digital Video Storage System
Page 1: ...DVSe ...