Extend Tumble
Minimizes wrinkles by adding
approximately 60 minutes of no-heat
tumbling after clothes are dry. The beeper
will sound every 2 minutes to remind you
to remove the clothes. The
ESTIMATED
TIME REMAINING
display will show
00
.
Damp Alert
This option causes the dryer to beep when
clothes have dried to a damp level. Remove
items that you wish to hang dry. The
DAMP
ALERT
will only beep when this option
is selected.
Removing clothes and hanging them when
they are damp can reduce the need to iron
some items.
Signal
Alerts you that the cycle is complete. The
beeper will continue to sound every two
minutes for the next 6 minutes, until the
clothes have been removed. The clothes
should be removed when the beeper goes
off so wrinkles don’t set in.
Press
SIGNAL
to select low, medium or high
volume, or to turn the beeper off.
Delay Start
Use to delay the start of your dryer.
1.
Choose your dry cycle and any options.
2.
Press
DELAY START
. You can change the
delay time in 1 hour increments using
the
+
or
–
arrow pads.
3.
Press the
START
pad to start the
countdown.
The countdown time will be shown in the
ESTIMATED TIME REMAINING
display.
NOTE:
If the door is opened while the dryer is
in
DELAY
, the countdown time will not restart
unless the door is closed and
START
has been
pressed again.
D
AMP
A
LERT
E
XTEND
T
UMBLE
(
Continued Next Page
)
Cycle Options
