40
Storing the Last Number Dialed
1. Make sure the phone is
OFF (not in TALK mode).
. Press the
redial button, then use the
5
or
6
buttons to select the desired number.
3. Press the
STORE (SKL) to store the number.
NOTE: If using handset;
HANDSET BASE
shows in the display. Use the
5
or
6
button to select
HANDSET
or
BASE
, and press the SELECT (SKL)
to
confirm record location.
4. Use the touch-tone to enter the name (up to 11 characters).
5. Press the
DONE (SKL) to scroll to
ENTER NUMBER
.
NOTE: If the redial number has more than 24 digits, the redial number
cannot be stored in memory.
6. Repeat Steps 9 through 11 in Storing CID Records in Internal Memory.
Inserting a Pause in the Dialing Sequence
Press the
#PAUSE button on the touch-tone pad twice to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or wait for a computer access tone.) A pause
shows on the display as a
P
. Each pause counts as 1 digit in the dialing sequence. If you need
a longer pause, press the
#PAUSE button twice again.
Reviewing a Stored Number
1. Make sure the phone is
OFF (not in TALK mode).
. Press the
MEMORY (SKL) to enter the main menu.
3. Use the
5
or
6
button to scroll to desired record.
-OR-
Press the -9 key to search for the desired record alphabetically. For example, if the
record names starts with the letter "N", pressing the 6 key will automatically skip to the
records starting with the letter "M". The 6 button can then be pressed multiple times
until the records starting with the letter "N" are displayed. You can then use the
5
or
6
button to scroll to desired record.
4. Press the
VIEW (SKR) to review the detail information of the record.
NOTE: The handset can access the base memory as well as the handset
memory. To access the base memory from the handset, press the
MEMORY (SKL) and then press the BASE (SKR).
