7
Paging from the Base/Group Page
Use the base-only to page all registered handsets at the same time.
1. Press the
find
button on the base. All handsets beep for two minutes, and each
handset screen displays
FIND HANDSET
.
. To cancel the page, press the
find
button on the base, or press the
TALK/SPEAKER
button or the
END
button on each handset.
Mute
To have a private, off-line conversation, use the
MUTE
feature. The party on the
telephone line cannot hear you, but you can hear them.
1. Press the
mute/menu OK
button. The handset display shows
MUTE ON
.
. Press the
mute/menu OK
button to cancel and return to your phone conversation.
Receiver Volume Control
When the handset is
ON
(in TALK mode) you may adjust the receiver volume by
pressing the
caller ID-volume
(
5
or
6
) button. There are five volume levels to choose
from. When the maximum or minimum volume level is reached, the phone beeps twice.
VOL 1 is minimum and VOL 5 is maximum.
Do Not Disturb (D-N-D)
This feature allows you to turn off all the handset ringer(s) at once, by pressing one
button at the base unit, even though the ringer volume of handset(s) has been preset.
1. In the standby mode, press the
do not disturb
button on the base.
. The DND indicator will light and shows in each handset display.
. To cancel, press the
do not disturb
button again.
NOTE: You can press the do not disturb button and activate the
function immediately, even when there is incoming call ringing in,
or during call screening after the call is taken by the answerer.
