5
Auto Standby
If you place the handset in the cradle while the handset is off the hook (during a call),
the call is automatically disconnected.
Ringer Volume (Shortcut)
There are two ways to set the ringer volume. One is the traditional way as described in
the Programming Functions; Sound Setup; Ringer Volume menus. The other one is this
short cut to ringer menu.
1. Make sure the phone is
OFF
(not in TALK mode).
. Press the
#pause/ringer
button to display
SET RINGER LEVEL 5
.
. Use the
caller ID-volume
(
5
or
6
) button to scroll to your selection.
LEVEL 5
is
the default setting.
. Press
#pause/ringer
button again to save and display the new selection for a few
seconds.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local telephone
company, you will receive Caller ID information (if available) on Call Waiting calls. During
a phone call, you will hear a beep to indicate another call is waiting on the line and Caller
ID information for the waiting call shows on the handset display.
• To connect to the waiting call, press the
flash
button on the handset, and your
original call is put on hold.
• To switch between the two calls, press the
flash
button.
