Connect the Wires
STEP 1
Connect the first line/load (black)
wire on the switch to the line or
load (black label) wire from the
wall.
STEP 2
Connect the second line/load
(black) wire on the switch to the
line or load (black label) wire from
the wall.
STEP 3
Connect the ground (green)
wire on the switch with the ground
(green label) wire from the wall.
STEP 4
Cap the 3-way/multi-way traveler
wire (if applicable).
For 3-way switch setup, visit
gelighting.com/cync
Attention: Incorrectly
connecting the ground wire
from the wall to the ground
wire on the switch will
damage the product.
STEP 5
Cap the neutral wire from the wall
(if applicable). Neutral wire is not
required to operate this switch.
NOTE: Both black wires on the switch are interchangeable and can be
connected to either the load or line wire from the wall.
3/4 inch
USING WIRE NUTS
1. Insert wires into wire nut.
2. Turn wire nut clockwise.
3. Pull gently on wires to test connection.
Summary of Contents for Cync CSWONBLBWF1NN
Page 13: ...PK 00102798 3...
