GE CYE22USHBSS, Owner'S Manual & Installation Instructions

Page: 34 / 98

34
49-60741-4
CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE
A cold water supply is required for automatic
LFHPDNHURSHUDWLRQ,IWKHUHLVQRWDFROGZDWHU
supply, you will need to provide one. See
,QVWDOOLQJWKH:DWHU/LQHVHFWLRQ
NOTES:
• Before making the connection to the
refrigerator, be sure the refrigerator power
cord is not plugged into the wall outlet.
‡,I\RXUUHIULJHUDWRUGRHVQRWKDYHDZDWHU
filter, we recommend installing one if your
water supply has sand or particles that
could clog the screen of the refrigerator’s
ZDWHUYDOYH,QVWDOOLWLQWKHZDWHUOLQHQHDU
WKHUHIULJHUDWRU,IXVLQJ6PDUW&RQQHFW
Œ
5HIULJHUDWRU7XELQJ.LW\RXZLOOQHHGDQ
DGGLWLRQDOWXEH:;;WRFRQQHFWWKH
ILOWHU'RQRWFXWSODVWLFWXEHWRLQVWDOOILOWHU
• Before connecting the water line to the house,
purge the house line for at least 2 minutes.
,I\RXDUHXVLQJFRSSHUWXELQJSODFHD
FRPSUHVVLRQQXWDQGIHUUXOHVOHHYHRQWRWKH
end of the tubing coming from the house cold
water supply.
,I\RXDUHXVLQJWKH6PDUW&RQQHFW Πtubing, the
nuts are already assembled to the tubing.
,I\RXDUHXVLQJFRSSHUWXELQJLQVHUWWKHHQG
of the tubing into the refrigerator connection, at
the back of the refrigerator, as far as possible.
While holding the tubing, tighten the fitting.
,I\RXDUHXVLQJ6PDUW&RQQHFW Πtubing,
insert the molded end of the tubing into the
refrigerator connection, at the back of the
refrigerator, and tighten the compression nut
until it is hand tight. Then tighten one additional
turn with a wrench. Over tightening may cause
leaks.
)DVWHQWKHWXELQJLQWRWKHFODPSSURYLGHGWR
hold it in position. You may need to pry open
the clamp.
11
A
B
C
Installation Instructions
INST
ALLA
TION INSTRUCTIONS
INSTALLING THE REFRIGERATOR (Cont.)
”
Compression
Nut
)HUUXOH
VOHHYH
SmartConnect Œ
Tubing
Refrigerator
Connection
1/4“ Tubing
Tuyau de 1/4 po
Tubería de 1/4 “
Tubing Clamp
Bride
Abrazadera del tubo
OR
Tubing Clamp
´7XELQJ